Home » CREST

CREST

Consisting of dewatering pumps, sewage pumps, and submersible pumps, Crest pumps from Liquid Movers are specifically developed and manufactured for the African market.
 
Distributed across sub-Saharan Africa by Liquid Movers, Crest pumps hold over 20 patents and uses only the smartest technology in its manufacturing equipment. All pumps are manufactured according to the strictest quality controls.


What are Crest pumps?

Crest pumps are specialised, corrosion-resistant industrial pumps that have been manufactured for South African operating conditions.

The core models are the KBZ dewatering pump, the KBS slurry pump and the WQ sewage pump. Depending on the model, construction includes cast iron casings and high chrome alloy impellers for abrasive duties, and all three are IP68 rated for submerged operation.

In southern Africa, the range extends to the submersible dewatering, drainage, and sewage pumps described below, developed for local operating conditions.

Every model features materials ideally suited to the fluid being moved, and construction designed to keep the pumps working under demanding conditions.

How do Crest pumps work?

Crest pumps are centrifugal. An impeller spins inside the pump casing, throwing liquid outward and creating the pressure that moves it through the discharge. Because the pump sits in the liquid, it needs no priming. What changes between models is the design and materials, each matched to the duty it is required to perform:

  • Dewatering (KBZ): a high-pressure-resistant mechanical seal allows submersion to 25 m, and the water passage design lets the pumped water cool the motor.
  • Slurry (KBS): a high chrome alloy impeller, combined with an agitator, keeps heavy slurry moving, and a 4-pole motor extends service life.
  • Sewage (WQ): a non-clogging two-vane impeller and large fluid channels pass solids without blocking.

What are the key benefits of the Crest pump range?

The benefits of Crest pumps include the following:

  • Robust construction, with cast iron casings on the KBZ and WQ, and IP68-rated motors across the range built for submerged operation.
  • Deep submersion, with the KBZ rated to 25 m thanks to its high-pressure-resistant mechanical seal.
  • Abrasion resistance and long service life in slurry, sludge, and gritty water, which quickly degrade most general-purpose pumps.
  • Built-in protection such as thermal cut-outs and high-pressure-resistant seals, which reduces unplanned downtime and protects the motor.
  • Range breadth, from 0.75 kW units up to 2 000 m³/h on the WQ sewage range, allowing a single supplier to cover an entire site.
  • Local availability, with stock, spares, and technical support held by Liquid Movers for customers across sub-Saharan Africa.

Which industries and applications are Crest pumps best suited for?

Crest pumps are specified wherever water, slurry or sewage has to be moved from below the surface, often in abrasive conditions. The table below sets out the industries where they are most used and the typical duties they cover.

Mining

Pit, shaft and underground dewatering, slurry transfer, sump emptying

Construction & civil engineering

Excavation dewatering, bentonite foundation works, muddy site water

Quarrying

Pit dewatering, abrasive water and slurry

Municipal water & wastewater

Sewage transfer from wet wells, effluent pumping, sludge handling

Industrial

Sump drainage, process effluent transfer, storm water

How to choose the right Crest pump for your application

Selecting a pump involves matching the machine to the duty. Considerations include:

  • The liquid being handled, including its temperature and how abrasive it is, which determines the model and impeller material.
  • The flow rate and head required, measured in m³/h and metres, which narrows the model and impeller selection.
  • Solids and abrasives in the liquid, since sludge, slurry, and sewage call for abrasion-resistant construction and a hydraulic design that will pass solids.
  • Operating conditions, including submersion depth, duty cycle, ambient temperature, and the power available at the installation.
  • Installation space, since compact designs such as the KBS (top discharge) and KBZ (vertical outlet) fit smaller casings and sumps.
  • Serviceability and spares, as a pump that is easy to strip and quick to re-part keeps a plant running.

If you are uncertain about which model best suits your application, contact us with the fluid, flow rate, head, and duty cycle, and our expert team will recommend a pump and provide a quote.

Frequently Asked Questions

Yes. Liquid Movers distributes Crest pumps across sub-Saharan Africa, including South Africa, and supplies dewatering pumps, drainage pumps, sewage pumps, and submersible pumps, together with genuine spare parts.

Start with the liquid, flow rate, and head, then consider submersion depth, solids content, and duty cycle. Send those details to our team, and we will recommend a model from the Crest range and confirm availability.

Yes. We supply genuine Crest replacement parts and provide after-sales support on the pumps we distribute. This means our products can be repaired and returned to service rather than replaced, to help lower costs.

For continuous, high-volume sewage transfer, a submersible sewage pump is almost always the right choice. It sits in the wet well and pumps from below the liquid surface, so it needs no priming, and its hydraulic design is built to pass the solids and rags that block other pump types.

The CREST WQ handles up to 2 000 m³/h and is abrasion-resistant for long service life in gritty effluent.

Air-operated diaphragm pumps are an alternative for intermittent, portable, or solids-heavy duties such as pit emptying and tanker offloading, but they are not economical for continuous bulk transfer. 

Sludge is thick, abrasive, and variable, and requires a pump that can tolerate solids and wear.

A submersible drainage pump with abrasion-resistant construction handles heavy sludge and slurry well, which is why the CREST KBS, rated to 372 m³/h in up to 15 metres of water, is specified for these duties.

For thicker sludge, lower flows, or intermittent work, an air-operated diaphragm pump is often appropriate, as it passes solids readily and can run dry without damage. Considerations when choosing a pump for sludge include solids content, viscosity, and whether the duty is continuous or occasional. 

Submersible pumps are usually grouped according to the job they do. 

  • Drainage pumps clear clean to lightly contaminated water from sumps, pits, and basements. 
  • Sewage pumps move effluent containing solids and rags. 
  • Dewatering pumps remove accumulated water from mines, quarries, and construction sites, often in abrasive conditions.
  • Borehole pumps lift water from deep wells.
  • Slurry pumps handle heavily abrasive mixtures.

The Crest range covers the drainage, sewage, and dewatering categories. 

Pumps are divided into two broad families.

Centrifugal pumps use a rotating impeller to add energy to the liquid, and are the most widely used type in industry, covering most water, effluent, and chemical transfer duties.

Positive displacement pumps, which include diaphragm, peristaltic, and gear pumps, trap a fixed volume of liquid and force it through the discharge. They are used for viscous fluids, precise dosing, and self-priming applications.

Crest submersible pumps are centrifugal. 

There is no single best type, only the type that matches the duty.

These include submersible drainage pumps for clearing water from sumps and pits, submersible sewage pumps for liquids carrying solids, and submersible dewatering pumps for mine, quarry, and construction site water.

The liquid, flow rate, head, and solids content determine the answer, and our expert team can recommend the best submersible pump for the job.

The potential risks of submersible systems are typically manageable. They can include:

  • Failed seals: Because the pump sits in the liquid, seal integrity is critical. A failed seal may allow fluid to reach the motor, which could lead to damage.
  • Access issues: Access for inspection and repair is also harder than with a surface-mounted pump, since the unit must be lifted out of the sump or wet well.

The risks are manageable with the right specifications, which include:

  • High-pressure-resistant mechanical seals, which allow submersion to 25 m on the CREST KBZ.
  • Built-in thermal protection, which guards the motor against overheating.
  • A planned maintenance schedule with genuine spare parts on hand.

Submersible pumps are also called submersible electric pumps, electric submersible pumps, or ESPs, and vertically immersible pumps where the pump body hangs into the liquid rather than sitting fully in it. They are also often named according to duty, such as sump pump, drainage pump,  sewage pump, or dewatering pump. 

The terms often overlap.

Submersible describes where the pump sits, fully immersed in the liquid it is moving, while a sump pump describes what it does: emptying a sump or pit. Many sump pumps are submersible, but a sump can also be emptied by a surface-mounted or pedestal pump that stays dry.

Submersible units are generally quieter, need no priming, and handle solids better.

The right brand is the one whose range, materials, and support match your application. 

Crest pumps are developed and manufactured specifically for the South African market. Liquid Movers distributes Crest pumps across sub-Saharan Africa with genuine spare parts and after-sales support and can provide repairs if necessary.  

Get the ideal pump for your specific application requirements.

SUBMIT YOUR ENQUIRY TODAY

Whatever your requirements, our team of experts is available to assist you.

Leave your message here: